C02 Incubators Air-Jacketed and Air-Jacketed UV (Ambient +5 deg. C to 50 deg. C)
- Available in 4 Models
Interior Volume (L): 151 | 240
Temp. Setting Range: Ambient +5 deg. C to 50 deg. C
Temp. Setting Deviation: ±0.1 deg. C
Temp. Sensor: PT1000
Heating System: Air-jacketed, direct heating
C02 Concentration Setting Range: 0~20%
C02 Concentration Setting Deviation: ±0.1%
Water Reservior Volume (L):
Moist Heat Disinfection: 3
Ultraviolet Disinfection: 4 | 6
Moist Heat Disinfection: Moist heat 9 hours at 90 deg. C (disinfection duration: about 25 hours)
Ultraviolet Disinfection: UV lamp for 30mins
Net Weight (kg):
Moist Heat Disinfection: 80 | 98
Ultraviolet Disinfection: 75 | 95
90ºC Moist Heat Disinfection OR Ultraviolet Disinfection
Two models for the C02 Incubator Air-Jacketed with Direct Heat and two models for the C02 Incubator UV Air-Jacketed with Direct Heat. The HF90 and HF240 are equipped with 90 deg. C Moist Heat Disinfection System and the HF151UV and HF212UV are equipped with a long-life ultraviolet lamp at the inner back of the chamber to eliminate contaminant. To take maximum effect of disinfection, the wavelength of UV light is maintained at 254mm.
All accessories and parts inside the chamber such as C02 sensors, fans and shelves are disinfected effectively. Mycoplasma is 100% eliminated in a routine disinfection circle. With a programmable C02 sensor "AUTO-START", Easy to clean structure design and a Inlet filter for C02 supply makes this an exceptional performing C02 Incubator.
- Air-jacketed and direct heat
- 90 deg. C moist heat (HF90andHF240) or ultravlolet (HF151UVandHF212UV) disinfection
- Efficient humidity system
- Programmable CO2 sensor "AUTO-START"
- Separate over-temperature cutout
- Built-in system diagnostics
- Advanced chamber circulation
- Alarm system
- Coved cornersandquick clean shelves
- 2 indepedent Pt1000 temperature sensors
90 deg. C moist heat disinfection (HF90andHF240)
HF90 and HF240 are equipped with 90 deg. C moist heat disinfection system. All accessories and parts inside the chamber such as C02 sensors, fans and shelves are disinfected effectively. Mycoplasma is 100% eliminated in a routine disinfection circle.
Ultraviolet disinfection (HF151UVandHF212UV)
A long-life ultraviolet lamp is equipped al the inner back of the chamber of HF151UV and HF212UV to eliminate contaminant. To take maximum effect of disinfection, the wavelength of UV light is maintained at 254nm.
Easy-to-clean structure design
All parts and structure inside the chamber are designed for cleaning convenience. All the interior corners are coved without dead corners. The shelves are removable to clean without tools.
Inlet filter for C02 supply
C02 gas passes through a HEPA filler before entering the chamber. The HEPA filter is able to filter particles larger than 0.3μm at 99.998%
HF212UV Air-jacketed C02 Incubator:
The thermal conductivity CO2 sensor has its baseline automatically reset without manual adjustment. The function ensures a stable and accurate working system.
A unique direct heating system combined with a PT1000 temperature sensor ensures stable temperature control with little gradient and prompt temperature recovery without overheat. Direct airflow ensures optimum temperature uniformity and insulating fibreglass reduce both the temperature fluctuation caused by door open and time to recovery after closed.
An innovative design of water reservoir is applied in Heal Force air-jacketed CO2 incubators. Comparing with the ordinary water tray, the reservoir enlarges volume and expands surface area, which leads to remarkable efficiency in humidity maintenance and recovery, and reduces recovery time dramatically.
Relatively independent space
Besides the main door, 3 inner glass doors (HF90 only) are equipped in the chambers, and make the chamber into relatively independent space together with the shelves. The design helps preventing other space in the chamber from fluctuation of environment parameters and introduction of contaminants in maximum extent in case a inner door is open. A structure of 6 half-size inner glass doors and shelves is optional for model HF240.
|Cat. No. ||EHF90 ||EHF240 ||EHF152UV ||EHF212UV |
|Interior volume ||151 litres ||240 litres ||151 litres ||212 litres |
|Outer dimensions (D*W*H) ||762mm*637mm*909mm ||820mm*780mm*944mm ||768mm*615mm*865mm ||763mm*910mm*795mm |
|Interior dimensions (D*W*H) ||530mm*470mm*607mm ||583mm*607mm*670mm ||530mm*470mm*607mm ||588mm*600mm*600mm |
|Shelf dimensions (D*W) ||445mm*423mm ||503mm*554mm ||445mm*423mm ||510mm*590mm |
|Standard quantity of shelves ||3 ||3 ||3 ||3 |
|Maxium quantity of shelves ||10 ||12 ||10 ||12 |
|Temperature setting range ||Ambient +5~50 deg. C ||Ambient +5~50 deg. C ||Ambient +5~50 deg. C ||Ambient +5~50 deg. C |
|Temperature setting deviation ||±0.1 deg. C ||±0.1 deg. C ||±0.1 deg. C ||±0.1 deg. C |
|Temperature sensor ||PT1000 ||PT1000 ||PT1000 ||PT1000 |
|Heating system ||Air-jacketed, direct heating |
|CO2 concentration setting range ||0-20% ||0-20% ||0-20% ||0-20% |
|CO2 concentration setting deviation ||±0.1% ||±0.1% ||±0.1% ||±0.1% |
|Recovery time of CO2 concentration to 5% @37 deg. C ||Less than 3 minutes ||Less than 3 minutes ||Less than 3 minutes ||Less than 3 minutes |
|CO2 concentration sensor ||TCD (thermal conductivi detector) |
|Humidity ||≥95% ||≥95% ||≥95% ||≥95% |
|Water reservior volume ||3 litres ||3 litres ||4 litres ||6 litres |
|Interior structure ||3 standard shelves |
with 3 inner glass doors
|3 standard shelves with a glass doors |
6 half-size shelves with 6 mini glass doors*
|3 standard shelves |
with a glass door
|3 standard shelves |
with a glass door
|Disinfectionandtime ||Moist heat 9 hours 90 deg. C (disinfection duration: about 25 hours) ||UV lamp for 30 minutes |
|Net weight ||80kg ||98kg ||75kg ||95kg |
|Rated power ||600w ||735w ||600w ||700w |
|Power supply ||220V±10% / 50Hz (standard) |
110V I 60Hz (optional)
* optional for model HF240