0item(s)

You have no items in your shopping cart.

Prices are current as of Monday, 22/04/2019.
Prices are GST exclusive. Tax is added at checkout.

Price On Request
Availability: Backorder
Product Code: K975X

Please ensure the dropdown options are correct

If you are interested in this product, please contact us at sales@proscitech.com.

HIGH VACUUM EVAPORATOR for Multiple Applications

The K975X Turbo Evaporator, is a multiple application system to enable a range of preparation techniques to be applied with the flexibility and module expansion capability to develop new methods and prepare new specimens.

It allows for Carbon Evaporation, Metal Evaporation from both Baskets and Crucibles and a Sputter Coating option.

A range of techniques can be practised including carbon support films and replicas for TEM, Carbon/Metal Evaporation, Low Angle Shadowing and sequential layer coatings using dual source evaporation and the Sputter Coating option can be used for a range of target materials.

The system flexibility is further enhanced by the use of a microcontroller, which readily allows the Customer access to a range of options, but readily 'defaults' to optimum operating conditions, allowing both fully automatic and manual override as required.

The unique Loading Rack out Drawer sample system gives the user easy sample access with good sample size and the hinged lid assembly makes any other areas of the system readily accessible.

The unit has a Turbo Pump, externally mounted for convenience and easy exchange, and is backed up by a Rotary Vacuum Pump. The complete pumping sequence is under fully automatic control, achieving a high vacuum for evaporation.

The Unit is bench mounted, with easy to use controls, and cannot be damaged by inadvertent use.

Note: The K975S is based on the K975X, however it has a special load lock door which allows the entry of 8" wafer for carbon coating, with applications such as FIB work.

Features:

  • Automatic pumping sequence
  • Samples up to 140mm square or 200mm diameter
  • Unique 'anti-stick' carbon rod gun evaporation assembly
  • Rack out drawer sample loading system
  • Selectable evaporation supplies giving x 4 evaporation settings
  • Restricted or full vent control
  • Sputter coating (option) for range of metal targets, including CrandPt
  • Film thickness monitor (option)


Advantages:

  • Ease of operation
  • Flexible usage
  • Reliable carbon evaporation
  • Convenient sample loading/unloading
  • Flexible operation - carbon and metal evaporation sources
  • Prevents disturbance of samples
  • Fully flexible system
  • Easy to measure level of metal or carbon deposition


Specifications of the K975X High Vacuum Evaporator:

  • Instrument Case - W: 450mm x D500 x H:300mm
  • Borosilicate Glass Work Chamber with Hinged Top Plate - Dia: 250mm x H: 300mm (can accommodate samples to 200 mm) (8") in Dia.
  • Safety Polycarbonate Implosion Guard - To suit work chamber readily removable for maintenance
  • Weight - 65kg.
  • Carbon Gun - Adjustable height with Tilt Control 0-20o. Uses 6.15mm Carbon Rods
  • Turbomolecular Pump - 100L/Seconds as Standard Optional Sizes Available
  • Vacuum Gauges - Active Gauge Head (incl. Penning gauge) Atm to 1x10-7 mbar.
  • Working Vacuum - within 15 minutes
  • Operating Vacuum - Into x10-5 mbar range (Liquid Nitrogen Trap Option Available)
  • Evaporation Supply (Pulsed or Variable Control) - 4 x Selectable, Low Voltage Volts a.c. V, 5V, 15V,25V @ 25 amps. 7V @100 amps
  • Specimen Table - With Tilt Facility 0-45o
  • Rotating Specimen Table Option - 60mm Dia.Tilting 0-45o, with Variable Speed Control 15rpm To 45rpm
  • Sputtering Option
  • Deposition - 0 - 100mA
  • Deposition Rate - 0-50nm/Minute Gold (Au)
  • Standard Target - 57 mm Au (options Pt, Pt/Pd, Pd, Cr, Ni, Cu, Ag)
  • Timer - 0 to 4 Minutes
  • HT Safety Interlocked


Use of optional sputter module
The sputter module has to be installed by the factory, it is permanently wired into the system. The exchange between sputtering and evaporation is easy - remove the evaporation source or sputter target from the appropriate terminal and replace it with the required source. To avoid contamination of the sputter source with carbon, remove the sputter target from the chamber if only one evaporation is needed. For sequential evaporation and sputtering it is best to install a shutter in order to protect the target during evaporation. (Shutter Assembly - AL410123).

Film Thickness Option

Services - Argon (For Sputtering option) Nominal 4 psi

  • Vacuum Pump (Recommended) - E2M5 complete with vacuum hose and oil mist filter 4m3/h
  • Electrical supply - 230 Volts - 50/60Hz - 8 amp normal including pump. In pulse mode a minimum of 16 amp is required.


Optional Accessories:

  • Rotary pump - See page V4 and K6 + basic oil mist filter
  • EK3170 - Diaphragm pump MD1 23 L/M
  • EK4160 - Low angled shadowing
  • EK4205 - Rotary stage planetary (with externally adjustable tilt)
  • EK4175 - Sputtering module
  • EK4165 - Film thickness monitor (mounted in K975X console)
  • EK3172 - XDS10 Scroll pump

Shipping

Orders with items in stock are packed within 24 hours. We ship with our best choice of courier, depending on goods ordered and shipping address provided.

Location

Standard delivery

Express delivery

Townsville/Local

Next day

N/A

Queensland

2-3 business days

N/A

NSW

4-10 business days

2-3 business days

SA/Tas/Vic/WA

6-14 business days

2-3 business days

Overseas

N/A

5-14 business days

*Note: Delivery times are as provided by our carriers and are estimates only. Delays may occur during peak periods, and due to factors outside the carriers' control.

Standard shipping is $15 in Australia (free on orders over $200). Add $5 to ship Express (under 2kg only)

Pickup

Order online and collect from our warehouse in Townsville.

Location

Freight Charge

Ready for collection

11 Carlton Street, Kirwan

$0

Once invoice has been emailed
(Less than 1 business day)



Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page